Timing Belt Offset M

High throughput capability

The timing belt offset M is capable of transferring up to 1700 load carriers per hour at right angle to adjacent parallel conveyors, whereas the timing belt transfer M is used to divert products to perpendicular conveyors, at a rate of up to 2000 load carriers per hour. The timing belt technology allows for very gentle, secure and low-noise transfers at high throughput rates.

The handled products are slightly lifted by a lifting mechanism and transferred by a timing belt conveyor. The number of belts used on the device depends on the size of the products handled. The timing belt transfer is particularly suitable for workplace applications, meeting the highest safety standards.

Benefits

  • High throughput capability
  • Flexibility in design, versatility to meet any application requirement
  • Safe and gentle transfer process, even with bad carton qualities
  • Low noise emission
  • Low-maintenance construction
  • Very short MTTR times (e.g. replacement of belt tracks = 5 min.)
  • Use of common standard parts, minimum spare parts required
  • Special construction of timing belt and belt guide enable smooth transfers
  • ZASM diverts to both sides
  • Optional use of mechanical or pneumatic lifting unit
  • Flexible selection of number of belts
  • Drives can be connected electrically from outside
  • Fast replacement of belt tracks
  • Optimum accessibility to sensors and actuators
conveying speedmax. 0.9 m/s (177 fpm)
transfer speedmax. 1.2 m/s (FU) (236 fpm)
drive power0.25 kW (0.34 hp)
nominal width420, 620, 820 mm (16.5", 24.4", 32.3")
tote weightmax. 50 kg 110 lbs
performanceup to 2000 LC/hr (ZASM) up to 1700 LC/hr (ZUSM
Information: Timing Belt Offset M Sell Sheet
Download PDF | 1 MB