DOWNLOAD
Register to download the following documents.
GET MORE DOCUMENTS AND DOWNLOADS: Register to our clients area!

Stacker

Combined stacking and unstacking of totes

The stacker is used to stack totes and/or unstack tote stacks. Either a belt conveyor or timing belt conveyor is used to convey totes into or out of the stacking device. The stacker can be adjusted to handle numerous types of totes and load carriers with sizes ranging from 300 x 300 mm to 600 x 600 mm. Depending on the tote types handled, the stacker is available with positive or frictional contact grippers.

The stacker type N is used to stack totes and/or unstack tote stacks. The stacker is adjusted to the respective tote type handled and is thus only suitable for stacking or unstacking totes of the same height.

Benefits

  • Flexibility in design, versatility to meet any application requirements
  • One machine for two functions
  • Cost reduction
  • Low control effort
  • High availability and reliability
  • Mechanical application with one drive or electro-mechanical application with pneumatic grippers
  • Combined stacking and unstacking of totes
  • Mechanical application only requires one drive
  • Rugged design
conveying speed
single totemax. 0.8 m/s (157 fpm)
tote stackmax. 0.3 m/s (59 fpm)
drive powermax. 0.75 kW (1 hp)
stacker heightmax. 1800 mm (70.87”)
overall heighttop conveyor level + 1800/1900 mm (70.87”/74.80”)
nominal width420, 620 mm (16.5”, 24.4”)
weight/stackmax. 50 kg (110 lbs)
Information: Stacker Sell Sheet
Download PDF | 1 MB
Information: Stacker Sell Sheet
Download PDF | 1 MB