TGW’s KingDrive® High Performance Transfer combines maximum versatility and performance with optimum safety features, availability and ease of maintenance. A unit of swivel-mounted wheels either transfers loads of varying sizes between parallel conveyors or diverts them at a 30°, 45° or 90° angle.
Your benefits
- Minimum roller pitch and complete covering of gaps
- Consistently compatible KingDrive® system for the entire solution
- Cartons do not get caught
- Maximum safety in workstation areas
- Minimum lifecycle costs
- Maximum performance for a large range of products
- Maximum system availability thanks to simple and fast replacement of components
Technical data
- Conveying speed: max 1.5 m/s
- Nominal width: min. 420 mm - max. 820 mm
- Transfer angle: 30° / 45° / 90°
- Transfers: to one side/both sides
- Payload: 0.1 to 50 kg
- Dimensions: min. 165 x 165 mm, max. 800 x 600 mm
The Pop-Up Wheel Transfer is used to divert loads to discharge lanes to one or both sides at a 30 degree angle. It allows for safe and low-noise transfers even with small gaps between the totes or cartons. It delivers highest performance rates of up to 4,000 units per hour and represents an inexpensive solution with a low control effort.
Your benefits
- Consistently compatible KingDrive® system for the entire solution
- Low control effort
- Minimum life cycle costs
- Maximum performance for a large range of products
Technical data
- Nominal width: 420 / 470 / 520 / 620 / 670 / 720 / 820 / 870 mm
- Roller pitch: 55 / 82.5 mm
- Drive technology: KingDrive®
- Conveying speed: 0.5 m/s to 1.2 m/s
- Temperature range: 0 °C to +40 °C
Timing belts are used to transfer the loads in parallel and at a right angle.
The Timing Belt Offset is capable of transferring up to 1,700 cases per hour at a right angle to adjacent parallel conveyors. The Timing Belt Transfer achieves a transfer rate of up to 1,900 cases per hour to lines arranged at right angle. Besides the high performance rates of the KingDrive® technology, the timing belt technology also meets highest safety standards, which makes the equipment perfectly suitable for workstation applications.
Your benefits
- Maximum versatility and performance with optimum safety features
- Consistently compatible KingDrive® system for the entire solution
- Adapts to customer-specific system requirements
- Fast replacement of belt strands reduces downtimes and maximises system availability
- Optimum lifecycle costs and low spare parts requirement
- "Transfer on the fly" technology ensures high performance rates for a wide range of loads
Technical data
- Conveying speed: max. 1.0 m/s
- Transfer speed: max. 1.0 m/s (FC)
- Drive power: 0.25 kW
- Nominal width: 420, 470, 620, 670, 820 mm
- Weight: max. 50 kg
- Performance: up to 1,900 c/h (ZAS) / up to 1,700 c/h (ZUS)
The KingDrive® Conveyor Spur is suitable for merging or diverting totes and cartons into or from adjacent parallel, perpendicular or 30° roller conveyors without changing the product orientation.
Your benefits
- Individual and cost optimised adaption to customer-specific requirements
- Quick and easy commissioning and minimal effort on site for fastest operation of the installation
- Fail-safe operation for highest availability
- Low-noise and energy efficient conveyor system for minimal life cycle costs
- High performing communication and integrated system monitoring
Technical data
- Nominal width: 420 / 470 / 520 / 620 / 720 / 820 / 870 / 1020 mm
- Division of rollers: 55 / 82.5 / 110 mm
- Diameter of rollers: 50 mm
- Drive: KingDrive®
- Conveying speed: 0.25 m/s to 2.0 m/s
- Acceleration: 0.5 m/s² to 2.5 m/s²
- Temperatures: 0 °C to +40 °C
The Wiping Pusher enables a gentle and weight-independent transfer.
It is used to gently transfer totes and cartons to adjacent perpendicular conveyors, changing from lengthwise into crosswise transport. A parallel crank gear provides the turning swivel movement of the pusher guide.
Your benefits
- Weight-independent and gentle transfer
- Performance of up to 2,250 totes per hour
- Transfer of different load carriers is possible
- Low-noise operation
- Stable construction
- Low space requirements
Technical data
- Conveying speed: 0.8 m/s (157 fpm)
- Nominal width: 400 mm (15.7")
- Gap between products: min. 600 mm (23.6")
- System pitch: 1000 mm (39.4")
- Overall height: (top conveyor level) + 1200 mm (47.2")
- Load type: cartons and totes
- Load dimensions: 600 x 400 mm (23.6'' x 15.7'')
- Height: min. 50 mm (2'') max. 550 mm (21.6'')
- Weight: max. 50 kg (110 lbs)
TGW’s Turntable is used to turn totes and cartons, changing the transport direction of the goods. Depending on the respective requirements, the turntable is either equipped with a belt conveyor or timing belt conveyor mounted on the rotating unit.
Your benefits
- Swiveling range of up to 360°
- Designed for different load handling devices
- Low-noise operation
Technical data
- Drive power: max. 0.18 kW (0.24 hp)
- Nominal width: 420, 620 mm (16.5", 24.4")
- Load dimensions: min. 400 x 400 mm (15.7'' x 15.7'') max. 800 x 600 mm (31.5'' x 23.6'')
- Weight: max. 50 kg (110 lbs)